3-in-1 Floor Scrub Brush
3-in-1 Floor Scrub Brush
🧹 Scrub stubborn dirt and corners
💧 Sweep away water with the squeegee
📏 Clean standing with an adjustable handle
Low stock
Couldn't load pickup availability
- American express payment method
- Apple pay payment method
- Paypal payment method
- Visa payment method
- Master payment method
- Discover payment method
"I used to scrub my shower on my hands and knees, and now I clean it standing up with this. The bristles get right into the corners and grout lines, and I finish the glass with the squeegee on the other side."
Tackle the floor. Finish the edges.
Bring scrubbing, water removal and small-debris pickup into one cleaning tool. Work across tile, turn toward the corners, then use the silicone blade to gather leftover water.
The grey Aravelia 3-in-1 Floor Scrub Brush combines a stiff-bristle head, squeegee and removable tweezers, so each part has a clear job in your routine.
Get into the corners a flat mop misses
Loosen stuck-on dirt with stiff polypropylene bristles on three sides. The 90° corner profile lets the brush work along floor edges and where tiled surfaces meet.
Use the broad face for open areas and the side bristles for edges. This is a firm scrubbing brush; test an inconspicuous area first on delicate or coated surfaces.
Turn the head to follow the space
A 360° rotating head helps you reposition around fixtures and along baseboards. Use the orange press control to adjust the head, then check that the joint is secure before scrubbing.
Change the angle to bring the bristles into contact with the area you want to clean, rather than forcing the handle sideways.
Move the water after the scrub
Switch to the flexible silicone squeegee to pull water and loosened residue across smooth tile or shower glass. It gives you a separate finishing edge on the same head.
Rinse away trapped grit before using the blade on glass, and guide collected water toward an appropriate drain or pickup point.
Set your reach for the job
Assemble the stainless-steel handle for a comfortable working height. The product diagram shows 28, 40 and 52 inch assembled configurations; the longest is approximately 132 cm.
The brush head measures approximately 10.6 × 3.8 inches (27 × 9.7 cm). Tighten the threaded connections before use and check them periodically while cleaning. The grip has an opening for hanging storage.
Pick up the bits the brush leaves behind
Slide out the orange tweezers from the brush head to pick up hair and small debris. They are handy for removing strands caught in the bristles without using your fingers.
Included in the grey configuration: one brush head with silicone squeegee, the sectional handle and hanging grip, removable tweezers, and a broom holder. This is a manually operated tool; no battery, charger or electrical connection is needed.
A clear routine from setup to storage
1. Assemble and check. Choose the handle length, tighten the joints and set the head angle.
2. Scrub, then squeegee. Use a cleaner suitable for your surface and follow its directions. Work in small areas with controlled pressure, then gather water with the silicone blade.
3. Clear and rinse. Remove caught hair with the tweezers, rinse the head and blade, and let them dry before hanging up.
Where to start: tiled bathroom floors, shower areas, kitchen tile and floor edges. For wood, laminate, polished finishes or delicate grout, follow the surface maker’s care guidance and test first. The stiff bristles are intended for scrubbing, so avoid assuming every finish tolerates the same pressure.